GI Earthing Electrodes

Copper bonded earth rods made from high tensile low carbon steel by molecularly bonding 99.9% pur copper with a minimum coating thickness of as per requirement. System is corrosion resistant & rated for high fault currents.

• Length – 1 to 3 meter (excluding lead terminal)
• Wall thickness – min 2mm
• Strip – min 32 x 6 mm (lead terminal to be 100mm extended at the top)
• Copper used shall be EC grade electronic
• copper earthing up to 99.9% purity
• Hot dip 80-100 micron
• Copper coated – min. 50 to 250+ micron